Metal Fume hoods

Steel fume hoods offered by Laboratory Solutions are made by Mott Manufacturing Ltd. Canada.
Mott’s fume hoods have been specifically developed to meet the demanding safety, energy conservation, and operational requirements of the modern laboratory. A ll fume hoods are designed using proven aerodynamic and ventilation concepts. They are then manufactured to exacting standards and tested to accepted protocols (ASHRAE 110).
Our attention to detail has allowed Mott’s fume hoods to earn a reputation as an industry leader in reliable containment performance and contemporary aesthetic design.
Available in numerous models, Mott’s fume hoods can be readily custom manufactured through the integration of an extensive offering of optional features. The resulting adaptability delivers effective safety and operational solutions for the many varied application demands found in laboratories today.
Mott is ISO certified and member of SEFA. Mott products are SEFA certified.

This all purpose fume hood is designed to meet most laboratory Constant Air Volume (CAV) or Variable Air Volume (VAV) requirements.

Pro series bench mounted fume hood is supplied with following standard features:

  • A vertical rising sash.
  • An automatic compensating upper by-pass .
  • Field-convertible to Restricted By-Pass f or VAV use.
  • A lower airfoil by-pass with electrical cord notches.
  • Cable or Chain/Sproket Sash System.
  • A UL/CSA approved fluorescent light fixture
  • Both corner posts pre-punched to accept a maximum of 5 plumbing fittings per post.
  • Standard FRP liner.
  • Removable interior access panel in each side wall.
  • Removable exterior side panels.
  • Several liner materials are available.
  • Available in either stainless steel cable, or chain and sprocket sash suspension system.

Optional Features:

  • Stainless, Epoxy, PVC liners
  • Automatic Sash Mechanism
  • Vision Panel
  • Flush Sill Airfoil
  • Distillation rack
  • Base cabinet and stands

The SafeGuardTM fume hood represents a balance of key safety elements and new design. The SafeGuardTMConstant Air Volume (CAV) fume hood has been developed to meet the challenging safety, energy conservation, and operational requirements of today’s laboratory. The new contemporary design creates a stylish image for today’s modern lab environment.

The SafeGuard bench mounted fume hood is supplied with the following standard features:

  • Vertical or Combination rising sash.
  • Chain and sprocket sash counterbalance system.
  • Field covertable for VAV use.
  • Low profile powder coated, type 316 stainless steel hinged airfoil is flush with work surf ace to for easy cleaning.
  • The airfoil allows for the safe introduction of electrical wiring into the fume hood in a ma nner that still allows the full closure of the sash.
  • 34” high sash glass allows for superior visibility of the fume hood interior.
  • UL/CSA approved fluorescent light fixture.
  • Two corner posts pre-punched to accept a maximum of 4 plumbing fittings per post.
  • Removable interior access panels.
  • Removable exterior side panels.
  • Auto sash leveler automatically closes to the 18” height which decreases exhaust air and offers extra protection to the operator.

Optional Features:

  • Round exhaust collar.
  • Stainless, Epoxy, PVC liners
  • Automatic Sash Mechanism
  • Vision Panel
  • Flush Sill Airfoil
  • Distillation rack
  • Base cabinet and stands

This all purpose fume hood is designed to meet most laboratory Constant Air Volume (CAV) designed to mount on a 30” deep counter top.

The Pro bench mounted fume hood is supplied with the following standard features:

  • Dual vertical rising sash.
  • An automatic compensating upper by-pass.
  • Optional restricted by-pass damper.
  • Cable or Chain & Sprocket sash system.
  • A lower airfoil by-pass with electrical cord notches.
  • A UL/CSA approved fluorescent light fixture
  • Both corner posts pre-punched to accept a nominal of
  • 5 plumbing fittings per post.
  • Removable interior access panel in each side wall, two per side.
  • Removable exterior side panels.

Optional Features:

  • Stainless, Epoxy, PVC liners
  • Automatic Sash Mechanism
  • Distillation rack
  • Base stand

Base Stand:

  • Fully welded tables are 9-3/4” high x 29” deep with
  • 2” square tube legs and supplied with leveling glides.
  • Tables larger than 48” wide a re supplied with six legs
  • Tables will support an 1800lb load.
  • Comes with PVC boots and levelers.

This all purpose fume hood is designed to meet most laboratory Constant Air Volume (CAV) or Variable Air Volume (VAV) requirements. Designed to sit directly on laboratory floor.

The Pro fume hood is supplied with the following standard features:

  • Dual vertical rising or optional upper combo sash.
  • A UL/CSA approved fluorescent light fixture.
  • Both corner posts pre-punched to accept a nominal of
  • 5 plumbing fittings per post.
  • Removable interior access panel in each side wall, two per side.
  • Electrical Receptacles.
  • Removable exterior side panels.
  • Floor mounted fume hoods are designed to operate with only one sash open.
  • Sash closes within 1” off the floor.

Optional Features:

  • Stainless, Epoxy, PVC liners
  • Automatic Sash Mechanism
  • Distillation Rack

Exhaust canopies are primarily used to exhaust steam, odors and heat.
In a work area where the expense and capabilities of a fume hood are not justified.

  • Available in ether wall or island configurations.
  • Standard 18” high.
  • Integrally welded construction.
  • Integral continuous condensation catch edge.
  • Integral duct stub.
  • Steel rod suspension.
  • Standard fixed baffle (not available with fluorescent light option).
  • Optional UL/CSA approved fluorescent light fixture complete with bulbs.
  • Powder coated and stainless steel construction available.

Optional Light Fixture:

  • Complete with a light enclosure.
  • Fixed baffle not available when ordering fluorescent light.
  • Wire from light to junction box is not concealed.